Skip to main content

openssl_rsa_public_key Resource

This page is generated from the Chef Infra Client source code.
To suggest a change, edit the openssl_rsa_public_key.rb file and submit a pull request to the Chef Infra Client repository.

All Infra resources page


Use the openssl_rsa_public_key resource to generate RSA public key files for a given RSA private key.

New in Chef Infra Client 14.0.

Syntax

The full syntax for all of the properties that are available to the openssl_rsa_public_key resource is:

openssl_rsa_public_key 'name' do
  group                    String, Integer
  mode                     Integer, String # default value: "0640"
  owner                    String, Integer
  path                     String # default value: 'name' unless specified
  private_key_content      String
  private_key_pass         String
  private_key_path         String
  action                   Symbol # defaults to :create if not specified
end

where:

  • openssl_rsa_public_key is the resource.
  • name is the name given to the resource block.
  • action identifies which steps Chef Infra Client will take to bring the node into the desired state.
  • group, mode, owner, path, private_key_content, private_key_pass, and private_key_path are the properties available to this resource.

Actions

The openssl_rsa_public_key resource has the following actions:

:create
Create the RSA public key file. (default)
:nothing
This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.

Properties

The openssl_rsa_public_key resource has the following properties:

group
Ruby Type: String, Integer

The group ownership applied to all files created by the resource.

mode
Ruby Type: Integer, String | Default Value: 0640

The permission mode applied to all files created by the resource.

owner
Ruby Type: String, Integer

The owner applied to all files created by the resource.

path
Ruby Type: String | Default Value: The resource block's name

An optional property for specifying the path to the public key if it differs from the resource block’s name.

private_key_content
Ruby Type: String

The content of the private key, including new lines. This property is used in place of private_key_path in instances where you want to avoid having to first write the private key to disk.

private_key_pass
Ruby Type: String

The passphrase of the provided private key.

private_key_path
Ruby Type: String

The path to the private key file.

Common Resource Functionality

Chef resources include common properties, notifications, and resource guards.

Common Properties

The following properties are common to every resource:

compile_time

Ruby Type: true, false | Default Value: false

Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the compile phase). Set to false to run while Chef Infra Client is configuring the node (the converge phase).

ignore_failure

Ruby Type: true, false, :quiet | Default Value: false

Continue running a recipe if a resource fails for any reason. :quiet will not display the full stack trace and the recipe will continue to run if a resource fails.

retries

Ruby Type: Integer | Default Value: 0

The number of attempts to catch exceptions and retry the resource.

retry_delay

Ruby Type: Integer | Default Value: 2

The delay in seconds between retry attempts.

sensitive

Ruby Type: true, false | Default Value: false

Ensure that sensitive resource data is not logged by Chef Infra Client.

Notifications

notifies

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may notify another resource to take action when its state changes. Specify a 'resource[name]', the :action that resource should take, and then the :timer for that action. A resource may notify more than one resource; use a notifies statement for each resource to be notified.

If the referenced resource does not exist, an error is raised. In contrast, subscribes will not fail if the source resource is not found.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for notifies is:

notifies :action, 'resource[name]', :timer
subscribes

Ruby Type: Symbol, 'Chef::Resource[String]'

A resource may listen to another resource, and then take action if the state of the resource being listened to changes. Specify a 'resource[name]', the :action to be taken, and then the :timer for that action.

Note that subscribes does not apply the specified action to the resource that it listens to - for example:

file '/etc/nginx/ssl/example.crt' do
  mode '0600'
  owner 'root'
end

service 'nginx' do
  subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end

In this case the subscribes property reloads the nginx service whenever its certificate file, located under /etc/nginx/ssl/example.crt, is updated. subscribes does not make any changes to the certificate file itself, it merely listens for a change to the file, and executes the :reload action for its resource (in this example nginx) when a change is detected.

If the other resource does not exist, the subscription will not raise an error. Contrast this with the stricter semantics of notifies, which will raise an error if the other resource does not exist.

A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:

:before

Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.

:delayed

Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.

:immediate, :immediately

Specifies that a notification should be run immediately, for each resource notified.

The syntax for subscribes is:

subscribes :action, 'resource[name]', :timer

Guards

A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:

  • A string is executed as a shell command. If the command returns 0, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may return true in addition to 0.
  • A block is executed as Ruby code that must return either true or false. If the block returns true, the guard property is applied. If the block returns false, the guard property is not applied.

A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.

Properties

The following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:

not_if

Prevent a resource from executing when the condition returns true.

only_if

Allow a resource to execute only if the condition returns true.

Examples

The following examples demonstrate various approaches for using the openssl_rsa_public_key resource in recipes:

Generate new public key from a private key on disk

openssl_rsa_public_key '/etc/ssl_files/rsakey_des3.pub' do
  private_key_path '/etc/ssl_files/rsakey_des3.pem'
  private_key_pass 'something'
  action :create
end

Generate new public key by passing in a private key

openssl_rsa_public_key '/etc/ssl_files/rsakey_2.pub' do
  private_key_pass 'something'
  private_key_content "-----BEGIN RSA PRIVATE KEY-----
Proc-Type: 4,ENCRYPTED
DEK-Info: DES-EDE3-CBC,5EE0AE9A5FE3342E
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-----END RSA PRIVATE KEY-----
"
  action :create
end
Edit this page on GitHub

Thank you for your feedback!

×











Search Results