Skip to main content

config.rb Optional Settings

In addition to the default settings in a knifeconfig.rb file, there are other subcommand-specific settings that can be added. When a subcommand is run, knife will use:

  1. A value passed via the command-line
  2. A value contained in the config.rbfile
  3. The default value

A value passed via the command line will override a value in the config.rbfile; a value in aconfig.rbfile will override a default value.

Warning

Many optional settings should not be added to the config.rb file. The reasons for not adding them can vary. For example, using --yes as a default in the config.rbfile will cause knife to always assume that “Y” is the response to any prompt, which may lead to undesirable outcomes. Other settings, such as --hide-by-mins (used only with the knife status subcommand) or --bare-directories (used only with the knife list subcommand) probably aren’t used often enough (and in the same exact way) to justify adding them to the config.rb file. In general, if the optional settings are not listed on the mainconfig.rbtopic, then add settings only after careful consideration. Do not use optional settings in a production environment until after the setting’s performance has been validated in a safe testing environment.

The following list describes the optional settings that can be added to the configuration file:

knife[:admin]

Create a client as an admin client.

knife[:admin_client_key]

knife[:admin_client_name]

knife[:after]

Add a run-list item after the specified run-list item.

knife[:all]

Indicates that all environments, cookbooks, cookbook versions, metadata, and/or data bags will be uploaded, deleted, generated, or tested. The context depends on which knife subcommand and argument is used.

knife[:all_versions]

Return all available versions for every cookbook.

knife[:attribute]

The attribute (or attributes) to show.

knife[:attribute_from_cli]

knife[:authentication_protocol_version]

Sets the authentication protocol that is used to communicate with Chef Infra Server. For example, specify protocol version 1.3 to enable support for SHA-256 algorithms:

knife[:authentication_protocol_version] = '1.3'

Note that authentication protocol 1.3 is only supported on Chef Server versions 12.4.0 and above.

knife[:bare_directories]

Prevent a directory’s children from showing when a directory matches a pattern.

knife[:before]

knife[:bootstrap_curl_options]

Arbitrary options to be added to the bootstrap command when using cURL. This option may not be used in the same command with --bootstrap-install-command.

knife[:bootstrap_install_command]

Execute a custom installation command sequence for Chef Infra Client. This option may not be used in the same command with --bootstrap-curl-options, --bootstrap-install-sh, or --bootstrap-wget-options.

knife[:bootstrap_no_proxy]

A URL or IP address that specifies a location that should not be proxied.

knife[:bootstrap_proxy]

The proxy server for the node that is the target of a bootstrap operation.

knife[:bootstrap_template]

The path to a template file to be used during a bootstrap operation.

knife[:bootstrap_vault_file]

The path to a JSON file that contains a list of vaults and items to be updated. knife[:bootstrap_vault_item]

A single vault and item to update as vault:item.

knife[:bootstrap_vault_json]

A JSON string that contains a list of vaults and items to be updated.

knife[:bootstrap_version]

The version of the Chef Infra Client to install.

knife[:bootstrap_wget_options]

Arbitrary options to be added to the bootstrap command when using GNU Wget. This option may not be used in the same command with --bootstrap-install-command.

knife[:both]

Delete both local and remote copies of an object.

knife[:chef_node_name]

knife[:chef_repo_path]

The path to the chef-repo.

knife[:chef_server_url]

knife[:chef_zero_host]

Override the host on which chef-zero listens.

knife[:chef_zero_post]

The port on which chef-zero listens.

knife[:client_key]

knife[:color]

knife[:concurrency]

The number of allowed concurrent connections.

knife[:config_file]

The configuration file to use.

knife[:cookbook_copyright]

knife[:cookbook_email]

knife[:cookbook_license]

knife[:cookbook_path]

knife[:delete_validators]

knife[:depends]

Ensure that when a cookbook has a dependency on one (or more) cookbooks, those cookbooks are also uploaded.

knife[:description]

The description for an environment and/or a role.

knife[:diff]

knife[:diff_filter]

Select only files that have been added (A), deleted (D), modified (M), and/or have had their type changed (T). Any combination of filter characters may be used, including no filter characters. Use * to select all paths if a file matches other criteria in the comparison.

knife[:disable_editing]

Prevent the $EDITOR from being opened and accept data as-is.

knife[:distro]

knife[:download_directory]

The directory in which cookbooks are located.

knife[:dry_run]

Take no action and only print out results.

knife[:editor]

The $EDITOR that is used for all interactive commands.

knife[:encrypt]

knife[:env_run_list]

knife[:environment]

The name of the environment.

knife[:exec]

A string of code that to be executed.

knife[:file]

Save a private key to the specified file name.

knife[:filter_result]

knife[:first_boot_attributes]

knife[:flat]

Show a list of file names. Set to false to view ls-like output.

knife[:force]

Overwrite an existing directory.

knife[:format]

knife[:forward_agent]

Enable SSH agent forwarding.

knife[:fqdn]

FQDN

knife[:freeze]

Require changes to a cookbook be included as a new version. Only the --force option can override this setting.

knife[:help]

knife[:hide_healthy]

Hide nodes on which a Chef Infra Client run has occurred within the previous hour.

knife[:hints]

An Ohai hint to be set on the target node.

knife[:host_key_verify]

Use --no-host-key-verify to disable host key verification.

knife[:id_only]

knife[:identity_file]

The SSH identity file used for authentication. Key-based authentication is recommended.

knife[:initial]

Create a API client, typically an administrator client on a newly installed Chef Infra Server.

knife[:input]

The name of a file to be used with the PUT or a POST request.

knife[:latest]

Download the most recent version of a cookbook.

knife[:local]

Return only the contents of the local directory.

knife[:local_mode]

knife[:log_level]

knife[:log_location]

knife[:manual]

Define a search query as a space-separated list of servers.

knife[:max_arguments_per_command]

knife[:max_command_line]

knife[:method]

The request method: DELETE, GET, POST, or PUT.

knife[:mismatch]

knife[:name_only]

Show only the names of modified files.

knife[:name_status]

Show only the names of files with a status of Added, Deleted, Modified, or Type Changed.

knife[:no_deps]

Ensure that all cookbooks to which the installed cookbook has a dependency are not installed.

knife[:node_name]

The unique identifier of the node. This may be a username with permission to authenticate to the Chef Infra Server or it may be the name of the machine from which knife is run. For example:

node_name 'user_name'

or:

node_name 'machine_name'

knife[:null_separator]

knife[:on_error]

knife[:one_column]

Show only one column of results.

knife[:patterns]

knife[:platform]

The platform for which a cookbook is designed.

knife[:platform_version]

The version of the platform.

knife[:pretty]

Use --no-pretty to disable pretty-print output for JSON.

knife[:print_after]

Show data after a destructive operation.

knife[:proxy_auth]

Enable proxy authentication to the Chef Infra Server web user interface.

knife[:purge]

Entirely remove a cookbook (or cookbook version) from the Chef Infra Server. Use this action with care, because only one copy of any single file is stored on the Chef Infra Server. Consequently, purging a cookbook disables any other cookbook that references one or more files from the cookbook that has been purged.

knife[:query]

knife[:readme_format]

The document format of the readme file: md (markdown) and rdoc (Ruby docs).

knife[:recurse]

Use --recurse to delete directories recursively.

knife[:recursive]

knife[:remote]

knife[:replace_all]

knife[:replace_first]

knife[:repo_mode]

The layout of the local chef-repo. Possible values: static, everything, or hosted_everything. Use static for just roles, environments, cookbooks, and data bags. By default, everything and hosted_everything are dynamically selected depending on the server type.

knife[:repository]

The path to the chef-repo.

knife[:rows]

knife[:run_list]

A comma-separated list of roles and/or recipes to be applied.

knife[:script_path]

A colon-separated path at which Ruby scripts are located.

knife[:secret]

The encryption key that is used for values contained within a data bag item.

knife[:secret_file]

The path to the file that contains the encryption key.

knife[:server_name]

Same as node_name. Recommended configuration is to allow Ohai to collect this value during each Chef Infra Client run.

knife[:ssh_attribute]

The attribute used when opening an SSH connection.

knife[:ssh_gateway]

The SSH tunnel or gateway that is used to run a bootstrap action on a machine that is not accessible from the workstation.

knife[:ssh_password]

The SSH password. This can be used to pass the password directly on the command line. If this option is not specified (and a password is required) knife prompts for the password.

knife[:ssh_password_ng]

knife[:ssh_port]

The SSH port.

knife[:ssh_user]

The SSH user name.

knife[:start]

knife[:supermarket_site]

The URL at which the Chef Supermarket is located. Default value: https://supermarket.chef.io.

knife[:template_file]

knife[:trailing_slashes]

knife[:tree]

Show dependencies in a visual tree structure (including duplicates, if they exist).

knife[:use current_branch]

Ensure that the current branch is used.

knife[:use_sudo]

Execute a bootstrap operation with sudo.

knife[:use_sudo_password]

knife[:user] and/or knife[:user_home]

The user name used by knife to sign requests made by the API client to the Chef Infra Server. Authentication fails if the user name does not match the private key.

knife[:user_key]

Save a public key to the specified file name.

knife[:user_password]

The user password.

knife[:validation_client_name]

knife[:validation_key]

knife[:validator]

knife[:verbose_commands]

knife[:verbosity]

knife[:with_uri]

knife[:yes]

Respond to all confirmation prompts with “Yes”.

By Subcommand

The following sections show the optional settings for the config.rbfile, sorted by subcommand.

bootstrap

The following knife bootstrap settings can be added to the config.rb file:

knife[:bootstrap_curl_options]

Adds the --bootstrap-curl-options option.

knife[:bootstrap_install_command]

Adds the --bootstrap-install-command option.

knife[:bootstrap_no_proxy]

Adds the --bootstrap-no-proxy option.

knife[:bootstrap_proxy]

Adds the --bootstrap-proxy option.

knife[:bootstrap_template]

Adds the --bootstrap-template option.

knife[:bootstrap_url]

Adds the --bootstrap-url option.

knife[:bootstrap_vault_item]

Adds the --bootstrap-vault-item option.

knife[:bootstrap_version]

Adds the --bootstrap-version option.

knife[:bootstrap_wget_options]

Adds the --bootstrap-wget-options option.

knife[:run_list]

Adds the --run-list option.

knife[:template_file]

Adds the --bootstrap-template option.

knife[:use_sudo]

Adds the --sudo option.

Note

The knife bootstrap subcommand relies on a number of SSH-related settings that are handled by the knife ssh subcommand.

client create

The following knife client create settings can be added to the config.rb file:

knife[:file]

Adds the --file option.

client reregister

The following knife client reregister settings can be added to the config.rb file:

knife[:file]

Adds the --file option.

configure

The following knife configure settings can be added to the config.rb file:

knife[:admin_client_name]

The name of the admin client that is passed as part of the command itself.

knife[:config_file]

Adds the --config option.

knife[:disable_editing]

Adds the --disable-editing option.

knife[:file]

Adds the --file option.

knife[:initial]

Adds the --initial option.

knife[:repository]

Adds the --repository option.

knife[:user_home]

Adds the --user option.

knife[:user_password]

Adds the --password option.

knife[:yes]

Adds the --yes option.

cookbook bulk delete

The following knife cookbook bulk delete settings can be added to the config.rb file:

knife[:purge]

Adds the --purge option.

knife[:yes]

Adds the --yes option.

cookbook create

The following knife cookbook create settings can be added to the config.rb file:

knife[:readme_format]

Adds the --readme-format option.

cookbook delete

The following knife cookbook delete settings can be added to the config.rb file:

knife[:all]

Adds the --all option.

knife[:print_after]

Adds the --print-after option.

knife[:purge]

Adds the --purge option.

cookbook download

The following knife cookbook download settings can be added to the config.rb file:

knife[:download_directory]

Adds the --dir option.

knife[:force]

Adds the --force option.

knife[:latest]

Adds the --latest option.

cookbook list

The following knife cookbook list settings can be added to the config.rb file:

knife[:all]

Adds the --all option.

knife[:environment]

Adds the --environment option.

cookbook metadata

The following knife cookbook metadata settings can be added to the config.rb file:

knife[:all]

Adds the --all option.

cookbook show

The following knife cookbook show settings can be added to the config.rb file:

knife[:fqdn]

Adds the --fqdn option.

knife[:platform]

Adds the --platform option.

knife[:platform_version]

Adds the --platform-version option.

cookbook upload

The following knife cookbook upload settings can be added to the config.rb file:

knife[:all]

Adds the --all option.

knife[:depends]

Adds the --include-dependencies option.

knife[:environment]

Adds the --environment option.

knife[:force]

Adds the --force option.

knife[:freeze]

Adds the --freeze option.

supermarket download

The following knife supermarket download settings can be added to the config.rb file:

knife[:file]

Adds the --file option.

knife[:force]

Adds the --force option.

knife[:supermarket_site]

The URL at which the Chef Supermarket is located. Default value: https://supermarket.chef.io.

supermarket install

The following knife supermarket install settings can be added to the config.rb file:

knife[:cookbook_path]

Adds the --cookbook-path option.

knife[:file]

Adds the --file option.

knife[:no_deps]

Adds the --skip-dependencies option.

knife[:use_current_branch]

Adds the --use-current-branch option.

knife[:supermarket_site]

The URL at which the Chef Supermarket is located. Default value: https://supermarket.chef.io.

supermarket share

The following knife supermarket share settings can be added to the config.rb file:

knife[:cookbook_path]

Adds the --cookbook-path option.

knife[:supermarket_site]

The URL at which the Chef Supermarket is located. Default value: https://supermarket.chef.io.

data bag create

The following knife data bag create settings can be added to the config.rb file:

knife[:secret]

Adds the --secret option.

knife[:secret_file]

Adds the --secret-file option.

data bag edit

The following knife data bag edit settings can be added to the config.rb file:

knife[:print_after]

Adds the --print-after option.

knife[:secret]

Adds the --secret option.

knife[:secret_file]

Adds the --secret-file option.

data bag from file

The following knife data bag from file settings can be added to the config.rb file:

knife[:all]

Adds the --all option.

knife[:secret]

Adds the --secret option.

knife[:secret_file]

Adds the --secret-file option.

data bag show

The following knife data bag show settings can be added to the config.rb file:

knife[:secret]

Adds the --secret option.

knife[:secret_file]

Adds the --secret-file option.

delete

The following knife delete settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:recurse]

Adds the --recurse option.

knife[:repo_mode]

Adds the --repo-mode option.

deps

The following knife deps settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:recurse]

Adds the --recurse option.

knife[:remote]

Adds the --remote option.

knife[:repo_mode]

Adds the --repo-mode option.

knife[:tree]

Adds the --tree option.

diff

The following knife diff settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:name_only]

Adds the --name-only option.

knife[:name_status]

Adds the --name-status option.

knife[:recurse]

Adds the --recurse option.

knife[:repo_mode]

Adds the --repo-mode option.

download

The following knife download settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:recurse]

Adds the --recurse option.

knife[:repo_mode]

Adds the --repo-mode option.

edit

The following knife edit settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:disable_editing]

Adds the --disable-editing option.

knife[:editor]

Adds the --editor option.

knife[:local]

Adds the --local option.

knife[:repo_mode]

Adds the --repo-mode option.

environment create

The following knife environment create settings can be added to the config.rb file:

knife[:description]

Adds the --description option.

environment from file

The following knife environment from file settings can be added to the config.rb file:

knife[:all]

Adds the --all option.

knife[:print_after]

Adds the --print-after option.

exec

The following knife exec settings can be added to the config.rb file:

knife[:exec]

Adds the --exec option.

knife[:script_path]

Adds the --script-path option.

list

The following knife list settings can be added to the config.rb file:

knife[:bare_directories]

Adds the -d option.

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:recursive]

Adds the -R option.

knife[:repo_mode]

Adds the --repo-mode option.

node from file

The following knife node from file settings can be added to the config.rb file:

knife[:print_after]

Adds the --print-after option.

node list

The following knife node list settings can be added to the config.rb file:

knife[:environment]

Adds the --environment option.

node run list add

The following knife node run list add settings can be added to the config.rb file:

knife[:after]

Adds the --after option.

knife[:run_list]

The run-list that is passed as part of the command itself.

node run list remove

The following knife node run list remove settings can be added to the config.rb file:

knife[:run_list]

The run-list that is passed as part of the command itself.

raw

The following knife raw settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:input]

Adds the --input option.

knife[:method]

Adds the --method option.

knife[:pretty]

Adds the --[no-]pretty option.

knife[:repo_mode]

Adds the --repo-mode option.

role create

The following knife role create settings can be added to the config.rb file:

knife[:description]

Adds the --description option.

role from file

The following knife role from file settings can be added to the config.rb file:

knife[:print_after]

Adds the --print-after option.

role show

The following knife role show settings can be added to the config.rb file:

knife[:environment]

Adds the --environment option.

ssh

The following knife ssh settings can be added to the config.rb file:

knife[:concurrency]

Adds the --concurrency option.

knife[:identity_file]

Adds the --identity-file option.

knife[:host_key_verify]

Adds the --[no-]host-key-verify option.

knife[:manual]

Adds the --manual-list option.

knife[:ssh_attribute]

Adds the --attribute option.

knife[:ssh_gateway]

Adds the --ssh-gateway option.

knife[:ssh_password]

Adds the --ssh-password option.

knife[:ssh_port]

Adds the --ssh-port option.

knife[:ssh_user]

Adds the --ssh-user option.

status

The following knife status settings can be added to the config.rb file:

knife[:hide_by_mins]

Adds the --hide-by-mins option.

knife[:run_list]

Adds the --run-list option.

knife[:sort_reverse]

Adds the --sort-reverse option.

upload

The following knife upload settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:recurse]

Adds the --recurse option.

knife[:repo_mode]

Adds the --repo-mode option.

user create

The following knife user create settings can be added to the config.rb file:

knife[:file]

Adds the --file option.

knife[:user_key]

Adds the --user-key option.

knife[:user_password]

Adds the --password option.

user reregister

The following knife user reregister settings can be added to the config.rb file:

knife[:file]

Adds the --file option.

xargs

The following knife delete settings can be added to the config.rb file:

knife[:chef_repo_path]

Adds the --chef-repo-path option.

knife[:concurrency]

Adds the --concurrency option.

knife[:diff]

Adds the --diff option.

knife[:dry_run]

Adds the --dry-run option.

knife[:force]

Adds the --force option.

knife[:local]

Adds the --local option.

knife[:max_arguments_per_command]

Adds the --max-args option.

knife[:max_command_line]

Adds the --max-chars option.

knife[:null_separator]

Adds the -0 option.

knife[:patterns]

Adds the --pattern option.

knife[:replace_all]

Adds the --replace option.

knife[:replace_first]

Adds the --replace-first option.

knife[:repo_mode]

Adds the --repo-mode option.

knife[:verbose_commands]

Adds the -t option.

Edit this page on GitHub

Thank you for your feedback!

×









Search Results